Dave, also check you have a gateway properly defined. It will not be needed
internally, but you do for outside.
Paul Aviles
Nickel Networks
-----Original Message-----
From: Dave Doherty [mailto:dave (at mark) skywaves.net]
Sent: Tuesday, February 20, 2007 9:05 PM
To: coba-e (at mark) bluequartz.org
Subject: [coba-e:08884] Re: Newbie Question
Hi Paul-
It works OK inside the plant, but the outside world can't see it.
Try it: http://12.180.69.64
You will get a redirect to http://12.180.69.64:444
This will not display.
-d
----- Original Message -----
From: "Paul Aviles" <paul.aviles (at mark) nickelnetworks.com>
To: <coba-e (at mark) bluequartz.org>
Sent: Tuesday, February 20, 2007 7:55 PM
Subject: [coba-e:08882] Re: Newbie Question
> Dave, if everything worked fine in-house then there is no need to open any
> ports as you already connected right? If you suspect a firewall issue you
> can always disable it, well.... providing you have access to the box of
> course. Can you ssh to it?
>
> Is the system behind another firewall perhaps?
>
> Paul Aviles
> Nickel Networks
>
>
> -----Original Message-----
> From: Dave Doherty [mailto:dave (at mark) skywaves.net]
> Sent: Tuesday, February 20, 2007 6:58 PM
> To: coba-e (at mark) bluequartz.org
> Subject: [coba-e:08881] Newbie Question
>
> Hi, all-
>
> I ran the basic installation of the NuOnce Blue Quartz 4.6 package, and
> everything works fine in-house.
>
> When I try to access the box from outside, I get hung up on a redirect to
> port 444. I have opened 444 for tcp and udp through the firewall, but I
> still get nothing.
>
> Is there a FAQ or a manual someplace that describes the required firewall
> settings for using this package?
>
> -Dave Doherty
> Skywaves, Inc.
> 97 Webster Street
> Worcester, MA 01603
> 508-425-7176
>
>
>
>
>
>
>