Try typing the install number followed by dd, i.e. '10 dd'.
Best,
--
Arthur Sherman
+972-52-4878851
CPTeam
> -----Original Message-----
> From: Jes Kasper Klittum [mailto:jes (at mark) enavn.com]
> Sent: Monday, October 16, 2006 10:05 AM
> To: coba-e (at mark) bluequartz.org
> Subject: [coba-e:07583] Re: BluQuartz with SAQTA Raid (WAS
> Re: Error installing NuOnce v 4.5 on SUN Fire x2200 with grub/raid)
>
> I have tried all available options in the installer - both with and
> without nvidia raid enabled, and none of the options are
> successfull. If
> only I was able to select the disk driver? In CentOS one is
> usually able
> to type linux dd to manually select the disk driver upon
> installation.
> Is this not possible with the NuOnce CD?
>
> Jes
>
> Loel Larzelere wrote:
> > Hmm, my upgrade plans might have hit a snag here. We have
> a pair of servers
> > with Intel CA 810E boards that I was proposing to update
> (cheaply) with
> > either a Rosewill RC-209 *or* a SYBA SD-SATA2-2E2I RAID
> card and a couple of
> > SATA drives in a mirrored pair. All with the latest
> version of the fine
> > NuOnce Installer (whatever version is current after we get
> the parts.
> >
> > If a could just find new small drives any more, this would
> be easier. I
> > don't quite see a pair of 150 or 250 GB drives for a
> dedicated DNS server.
> >
> > L
> >
> >
> >
> > --------------------------------------------------------
> > E-Mail: loel (at mark) columbus.rr.com <mailto:loel (at mark) columbus.rr.com>
> > --------------------------------------------------------
> > Home Page: http://home.columbus.rr.com/klarzelere/loel.html
> > --------------------------------------------------------
> >
> >
> > -----Original Message-----
> > From: Gerald Waugh [mailto:gwaugh (at mark) frontstreetnetworks.com]
> > Sent: Friday, October 13, 2006 12:59 PM
> > To: coba-e (at mark) bluequartz.org
> > Subject: [coba-e:07560] Re: Error installing NuOnce v 4.5
> on SUN Fire x2200
> > with grub/raid
> >
> > Look at your BIOS, is there a way to disable hardware RAID?
> > Else select a single drive install, and RAID will be done
> in hardware.
> > Most servers with onboard RAID us FRAID (Fake Raid) and are
> slower than
> > using software RAID.
> > So best option is to 'Disable Hardware RAID'
> >
> > Gerald
> >
> >
>
> --
> Med venlig hilsen,
>
> Jes Kasper Klittum
>
> enavn ApS [ Administration ]
> Ringstedgade 11 A
> 4700 NëÔtved
> -------------
> enavn ApS [ Datacenter ]
> Århusgade 88
> 2100 KÃenhavn ŽØ
>
>
> Tel.: +45 88205000
> Fax: +45 88205010
> support (at mark) enavn.dk
>
>