I have tried all available options in the installer - both with and
without nvidia raid enabled, and none of the options are successfull. If
only I was able to select the disk driver? In CentOS one is usually able
to type linux dd to manually select the disk driver upon installation.
Is this not possible with the NuOnce CD?
Jes
Loel Larzelere wrote:
> Hmm, my upgrade plans might have hit a snag here. We have a pair of servers
> with Intel CA 810E boards that I was proposing to update (cheaply) with
> either a Rosewill RC-209 *or* a SYBA SD-SATA2-2E2I RAID card and a couple of
> SATA drives in a mirrored pair. All with the latest version of the fine
> NuOnce Installer (whatever version is current after we get the parts.
>
> If a could just find new small drives any more, this would be easier. I
> don't quite see a pair of 150 or 250 GB drives for a dedicated DNS server.
>
> L
>
>
>
> --------------------------------------------------------
> E-Mail: loel (at mark) columbus.rr.com <mailto:loel (at mark) columbus.rr.com>
> --------------------------------------------------------
> Home Page: http://home.columbus.rr.com/klarzelere/loel.html
> --------------------------------------------------------
>
>
> -----Original Message-----
> From: Gerald Waugh [mailto:gwaugh (at mark) frontstreetnetworks.com]
> Sent: Friday, October 13, 2006 12:59 PM
> To: coba-e (at mark) bluequartz.org
> Subject: [coba-e:07560] Re: Error installing NuOnce v 4.5 on SUN Fire x2200
> with grub/raid
>
> Look at your BIOS, is there a way to disable hardware RAID?
> Else select a single drive install, and RAID will be done in hardware.
> Most servers with onboard RAID us FRAID (Fake Raid) and are slower than
> using software RAID.
> So best option is to 'Disable Hardware RAID'
>
> Gerald
>
>
--
Med venlig hilsen,
Jes Kasper Klittum
enavn ApS [ Administration ]
Ringstedgade 11 A
4700 NëÔtved
-------------
enavn ApS [ Datacenter ]
Århusgade 88
2100 KÃenhavn ŽØ
Tel.: +45 88205000
Fax: +45 88205010
support (at mark) enavn.dk