Connect a terminal connection via the serial connector with a Laplink lead,
once booted you can login that way.
If you don't have a cable use this link
http://www.dincom.co.uk/bq/nullmodem.php
Best Regards,
Howie.
-----Original Message-----
From: Reg [mailto:reginaldvw (at mark) gmail.com]
Sent: 10 October 2006 21:24
To: coba-e (at mark) bluequartz.org
Subject: [coba-e:07517] Re: LCD panel on RaQ 550 - network address
Problem is the server canot be reached thru its former IP address since it
was removed from the datacenter...
On 10/10/06, Franklin S Werren <webmaster (at mark) bagpipes.net> wrote:
> Should work... It needs to re-boot...
> If not ...Log in via the GUI via the old IP address And change
> there.... I have done it myself On 2 of my servers to change IP
> addresses.
>
> Franklin S Werren
> www.chautauqualake.net
> www.bagpipes.net
> www.franksradio.net
> www.chautauqua.us
>
>
>
>
> -----Original Message-----
> From: Reg [mailto:reginaldvw (at mark) gmail.com]
> Sent: Tuesday, October 10, 2006 5:52 AM
> To: coba-e (at mark) bluequartz.org
> Subject: [coba-e:07506] LCD panel on RaQ 550 - network address
>
> Hi list,
> Problem: i cannot change the IP on an old server (Cobalt RaQ 550,
> sorry slightly off list in this BQ/Centos mailing list).
> I tried to change the network address to 192.168.10.222 but it did not
work.
> I went through all the steps on the LCD panel like I've done before
> and then try to [S]ave it in the last step but it does not change. I
> mean: it does not save it, it just shows the old IP again.
> Any suf-ggestions?
> Brgds,
> Reginald
>
> --
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.408 / Virus Database: 268.13.1/470 - Release Date:
> 10/10/2006
>
>
> --
> No virus found in this outgoing message.
> Checked by AVG Free Edition.
> Version: 7.1.408 / Virus Database: 268.13.1/470 - Release Date:
> 10/10/2006
>
>
>
>