hi blues,
Based on 2.4.28_BF5_C7 source I have build 2 kernel binaries that are in
production.
[Fetch via passive ftp connection]
wget ftp://bluequartz:bluequartz (at mark) excelsior.singnet.com.sg/kernel-2.4.28_BF5_C7.tar.gz
wget ftp://bluequartz:bluequartz (at mark) excelsior.singnet.com.sg/kernel-2.4.28-rc1.tar.gz
Updated 20060512
-Added Raq550 OS kernel binaries in tar.gz
kernel-2.4.28_BF5_C7.tar.gz (6.6M - stable)
kernel-2.4.28-rc1.tar.gz (3M - alpha build, in production)
Cheers
patrick
On Wed, 10 May 2006 patricko (at mark) staff.singnet.com.sg wrote:
> Hi,
>
>
> Additional info:
>
> [1]
> ftp://bluequartz:bluequartz (at mark) excelsior.singnet.com.sg/kernel-2.4.28_BF5_C7-1.src.rpm
> are built to replace SUN Cobalt raq3-4/raqXTR/raq550 default kernels
>
>
> [2]
> The kernel has been used in production for above platforms
> with 1 year uptime as of may 2006. see README - for details
>
>
> [3]
> The binary kernel rpm are for raq550.
> ftp://bluequartz:bluequartz (at mark) excelsior.singnet.com.sg/kernel-2.4.28_BF5_C7-1.i586.rpm
>
>
> [4]
> For Cento OSes, you need to rpmbuild the src.rpm to
> MATCH AGAINST Centos Glibc version
>
>
>
> Cheers
> patrick
>
>
>
>
> On Wed, 10 May 2006 patricko (at mark) staff.singnet.com.sg wrote:
>
> > Hi,
> >
> > Sorry folks. I am behind a firewall.
> > Thus http://excelsior.singnet.com.sg/stable/bluequartz
> > connection will cut after n bytes.
> >
> >
> > Please use the below passive ftp connection:
> >
> >
> > wget ftp://bluequartz:bluequartz (at mark) excelsior.singnet.com.sg/kernel-2.4.28_BF5_C7-1.i586.rpm
> > wget ftp://bluequartz:bluequartz (at mark) excelsior.singnet.com.sg/kernel-2.4.28_BF5_C7-1.src.rpm
> > wget ftp://bluequartz:bluequartz (at mark) excelsior.singnet.com.sg/kernel-headers-2.4.28_BF5_C7-1.i586.rpm
> > wget ftp://bluequartz:bluequartz (at mark) excelsior.singnet.com.sg/kernel-source-2.4.28_BF5_C7-1.i586.rpm
> > wget ftp://bluequartz:bluequartz (at mark) excelsior.singnet.com.sg/README-2.4.28_BF5_C7-1
> >
> >
> >
> >
> >
> > For RaQ3-4,
> >
> > These are AMD K6-2 based servers. Compiled i586 binaries
> > are backward compatible.
> >
> > For RAID, there isnt any hardware RAID on board.
> > Raq3-4 uses software RAID on basic super I/O chip.
> >
> > Anyway, all the basic hardware support have been built into
> > the rpms. *** that I know of - work out based on my own raq ***
> >
> > Most of the raq3-4 will work out-of-the-box, only some
> > that are made for pre-release / post-release might have
> > some minor glitches.
> >
> >
> > Cheers
> > patrick
> >
> > On Wed, 10 May 2006, Howie Dines wrote:
> >
> > > Hi there Patrick,
> > >
> > > I guess there wouldn't be an issue running your kernel on a plain RaQ3-4 (ie not i or r). Or would the RAID bits cause a problem? Would I also have to run rpmbuild on http://excelsior.singnet.com.sg/stable/bluequartz/kernel-2.4.28_BF5_C7-1.src.rpm to make a 386 version as I assume the 586 won't work.
> > >
> > > Finally is there a problem with your server, it keeps dropping connection at approx the same position of the download. 11:30:09 (56.16 KB/s) - Connection closed at byte 17383240. Retrying
> > >
> > > Thanks in advance,
> > >
> > > Best Regards,
> > > Howie.
> > >
> > > ---------- Original Message -----------
> > > From: patricko (at mark) staff.singnet.com.sg
> > > To: coba-e (at mark) bluequartz.org
> > > Sent: Wed, 10 May 2006 17:07:55 +0800 (SGT)
> > > Subject: [coba-e:05123] Re-post : PLEASE Mirror these rpm kernels aka 2.4.28_BF5_C7 premptive
> > >
> > > > this portion is for google web spider
> > > >
> > > > Thanks
> > > >
> > > > On Wed, 10 May 2006 patricko (at mark) staff.singnet.com.sg wrote:
> > > >
> > > > > Hi blues,
> > > > >
> > > > > Please help to mirror these kernel rpms for raq4i, raqXTR and raq550
> > > > >
> > > > > *****************************************************************
> > > > > ***You can use these rpms to build / port BQ into cobalt raqs ***
> > > > > *****************************************************************
> > > > >
> > > > >
> > > > > ps: Have tested these kernels with 1 year uptime in production.
> > > > >
> > > > >
> > > > >
> > > > > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > > >
> > > > > http://excelsior.singnet.com.sg/stable/bluequartz/
> > > > >
> > > > >
> > > > > wget http://excelsior.singnet.com.sg/stable/bluequartz/kernel-2.4.28_BF5_C7-1.src.rpm
> > > > > wget http://excelsior.singnet.com.sg/stable/bluequartz/kernel-headers-2.4.28_BF5_C7-1.i586.rpm
> > > > > wget http://excelsior.singnet.com.sg/stable/bluequartz/kernel-source-2.4.28_BF5_C7-1.i586.rpm
> > > > > wget http://excelsior.singnet.com.sg/stable/bluequartz/README-2.4.28_BF5_C7-1
> > > > >
> > > > > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > > > >
> > > > > Thanks
> > > > >
> > > > > cheers
> > > > >
> > > > > patrick
> > > > >
> > > > >
> > > > >
> > > ------- End of Original Message -------
> > >
> > >
> > >
> >
> >
>
>
>