With terminal console I got this:
where is the error?
Sun Cobalt - Smaller, Bluer, Better, and Free
Firmware version 2.10.3-ext3
Current date: Jul 09 15:13:51 UTC 2009
ROM build info: Thu Mar 11 08:51:36 MST 2004 .
System serial number: Uninitialized
System type: 3000 series system, Version 2 board
Silicon serial number: f0000007f5516401
Monitor: 153536 bytes
Memory: 384 MB
CPU: 1 processor(s) detected
CPU 0: AuthenticAMD 448MHz (4.5 x 100MHz host bus) [BSP]
Initializing flash: done
Flash Bank 0: AMD AM29F080B 1024KB (01:d5)
Flash Bank 1: not installed.
Mounting ROM fs: done
Initializing PCI: done
Host Bus: 0 (device 1f:07) [33MHz]
Device: 00:00 10b9:1541 Acer Labs M1541 Aladdin V Host Bridge
Device: 01:00 10b9:5243 Acer Labs M5243 AGP Controller
Device: 02:00 10b9:5237 Acer Labs M5237 USB Controller (IRQ 6)
Device: 03:00 10b9:7101 Acer Labs M7101 PMU
Device: 07:00 10b9:1533 Acer Labs M1543 Aladdin V PCI-ISA Bridge
Device: 0e:00 1000:000f Symbios Logic SYM53C875 SCSI Controller (IRQ 12)
Device: 0f:00 10b9:5229 Acer Labs M5229 TXpro IDE Controller (IRQ 14)
Device: 10:00 100b:0020 National DP83815 MacPhyter Ethernet (IRQ 11)
Device: 12:00 100b:0020 National DP83815 MacPhyter Ethernet (IRQ 10)
Bridged Bus: 1 (bridge: 00:01:00)
Initializing ethernet: 2 controller(s) found
National Semiconductor DP83815 Found at port 0xfc00, MAC: 00:10:e0:04:d1:ff
National Semiconductor DP83815 Found at port 0xfb00, MAC: 00:10:e0:04:d2:02
Initializing IDE: found ALI M5229 at 00:78
spinning up second channel: done
scanning ide0: slave
scanning ide1:
IDE: stabilizing spinup: 100%
Checking Memory: done
Press spacebar to enter ROM mode
System is in LCD menu mode
Enabling L2 cache: on-chip L2 is 128K -done
First stage kernel (Linux): Decompressing - done
ERROR: cannot relocate with filesize 0
command line: 'console=ttyS0,115200 debug ip=on root=/dev/nfs
nfsroot=/nfsroot-x
86,rsize=8192 '
booting kernel...
Linux version 2.4.25-ROM (duncan (at mark) atherton) (gcc version 3.3.3 (Debian
20040306))
#1 Thu Mar 11 08:47:53 MST 2004
BIOS-provided physical RAM map:
BIOS-e801: 0000000000000000 - 000000000009f000 (usable)
BIOS-e801: 0000000000100000 - 0000000018000000 (usable)
384MB LOWMEM available.
On node 0 totalpages: 98304
zone(0): 4096 pages.
zone(1): 94208 pages.
zone(2): 0 pages.
DMI not present.
Kernel command line: console=ttyS0,115200 debug ip=on root=/dev/nfs
nfsroot=/nfs
root-x86,rsize=8192
Initializing CPU#0
Detected 448.211 MHz processor.
Calibrating delay loop... 894.56 BogoMIPS
Memory: 386896k/393216k available (1141k kernel code, 5932k reserved, 244k
data,
100k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
Enabling new style K6 write allocation for 384 Mb
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU: L2 Cache: 128K (32 bytes/line)
CPU: After generic, caps: 008021bf c08029bf 00000000 00000002
CPU: Common caps: 008021bf c08029bf 00000000 00000002
CPU: AMD-K6(tm)-III Processor stepping 04
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch (at mark) atnf.csiro.au)
mtrr: detected mtrr type: AMD K6
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
Journalled Block Device driver loaded
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
SERIAL_PCI en
abled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10f
Non-volatile memory driver v1.2
loop: loaded (max 8 devices)
natsemi dp8381x driver, version 1.07+LK1.0.17, Sep 27, 2002
originally by Donald Becker <becker (at mark) scyld.com>
http://www.scyld.com/network/natsemi.html
2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
eth0: NatSemi DP8381[56] at 0xd8800000, 00:10:e0:04:d1:ff, IRQ 11.
eth1: NatSemi DP8381[56] at 0xd8802000, 00:10:e0:04:d2:02, IRQ 10.
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ALI15X3: IDE controller at PCI slot 00:0f.0
ALI15X3: chipset revision 193
ALI15X3: 100% native mode on irq 14
ide0: BM-DMA at 0xfdd0-0xfdd7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xfdd8-0xfddf, BIOS settings: hdc:DMA, hdd:DMA
hdb: ST310211A, ATA DISK drive
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
blk: queue c02990dc, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0xfdf8-0xfdff,0xfdf6 on irq 14
hdb: attached ide-disk driver.
hdb: 19541088 sectors (10005 MB) w/1024KiB Cache, CHS=19386/16/63, UDMA(33)
Partition check:
hdb: hdb1 hdb2 hdb3 hdb4 < hdb5 hdb6 >
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
8regs : 621.200 MB/sec
32regs : 367.200 MB/sec
pII_mmx : 849.600 MB/sec
p5_mmx : 825.600 MB/sec
raid5: using function: pII_mmx (849.600 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
eth0: link up.
eth0: Setting full-duplex based on negotiated link capability.
eth1: autonegotiation did not complete in 4000 usec.
Sending DHCP and RARP requests ., OK
IP-Config: Got DHCP answer from 192.168.1.1, my address is 192.168.1.55
eth1: remaining active for wake-on-lan
IP-Config: Complete:
device=eth0, addr=192.168.1.55, mask=255.255.255.0, gw=192.168.1.1,
host=192.168.1.55, domain=roberto.ws, nis-domain=(none),
bootserver=192.168.1.1, rootserver=192.168.1.1, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Looking up port of RPC 100003/2 on 192.168.1.1
portmap: server 192.168.1.1 not responding, timed out
Root-NFS: Unable to get nfsd port number from server, using default
Looking up port of RPC 100005/1 on 192.168.1.1
portmap: server 192.168.1.1 not responding, timed out
Root-NFS: Unable to get mountd port number from server, using default
mount: server 192.168.1.1 not responding, timed out
Root-NFS: Server returned error -5 while mounting /nfsroot-x86
VFS: Unable to mount root fs via NFS, trying floppy.
VFS: Cannot open root device "nfs" or 02:00
Please append a correct "root=" boot option
Kernel panic: VFS: Unable to mount root fs on 02:00