No NAT running at all, only DNS is the same for all other servers. The
lookups are fine
and correct.
Customers can get mail just fine, if they reply to an email that is
where it starts as the sever
can not talk to the smart relay host is where all email goes to and
comes from.
RC
Chris Gebhardt - VIRTBIZ Internet wrote:
>
> Richard C. Barker Sr. wrote:
>> No my 5 other server are setup the same and can ping the gateway and
>> the firewall.
>>
>> I am see the mailq building and all are saying (Deferred: Connection
>> timed out with host.whatever.com)
>>
>> netstat -nr
>> 1.x.x.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
>> 2.x.x.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
>> 127.0.0.0 0.0.0.0 255.0.0.0 U 0
>> 0 0 lo
>> 0.0.0.0 x.x.x.1 0.0.0.0 UG 0 0 0 eth0
>>
>
> Well I doubt it's a Layer2 issue. You're using NAT on non-routable
> IPs inside a firewall? Hmmmm. That's where I would be looking first.
>
> You could try re-running the netconfig and restarting the network.
>
> But wait... mailq is building? Indicating customers are connecting?
> Are you certain this isn't a DNS issue?
>
--
+---------------------------------------------+
Richard C. Barker Sr.
CEO & President
1-800-510-3139
ProBass Networks Inc.
http://www.probassnetworks.net
http://www.probass.net
***************************************
DISCLAIMER : -
This e-mail is confidential and intended only for the use
of the individual or entity named above and may contain
information that is privileged. If you are not the intended
recipient, you are notified that any dissemination, distribution
or copying of this e-mail is strictly prohibited. If you have
received this email in error, please notify us immediately
by return email or telephone and destroy the original message.
+---------------------------------------------+