Index: [Article Count Order] [Thread]

Date:  Wed, 28 Nov 2007 09:17:15 -0900
From:  Jim Dory <jdory (at mark) nomealaska.org>
Subject:  [coba-e:11282] Re: about to try my first cmu migration
To:  coba-e (at mark) bluequartz.org
Message-Id:  <474DB0AB.4000606 (at mark) nomealaska.org>
In-Reply-To:  <02f301c831c2$c745dc80$0101a8c0@systemax>
References:  <02f301c831c2$c745dc80$0101a8c0@systemax>
X-Mail-Count: 11282

Gerald Waugh wrote:
> Jim Dory wrote on Tuesday, November 27, 2007 6:22 PM
>   
>>>   
>>>       
>> The lcd still shows the nomecity.org name and it doesn't appear I can 
>> change it using the panel buttons as they are not reacting. Hopefully 
>> since I've changed the hostname under the webinterface that will be 
>> enough.  /jd
>>
>>     
> It takes about 15 minutes to update the LCD on Tyan and MSI servers.
> Update LCD is a very fast cron job, that runs every 15 minutes 
> Changing in the GUI should work OK.
> We normally just make the server name, something like
>    srv1.nomecity.org
> At least make it a unique host name.
> This will avoid conflicts that may occurr during migration.
>
> Gerald
>
>
>   
It locked up when I was untarring the cmuExport. Completely unresponsive 
so I had to do a cold reboot. After that, lcd was fine and the untarring 
went pretty good. One error on setting up an unused virtual site and one 
error on a particular pdf file it couldn't find, but reported success 
otherwise. Oh, and an error about not finding the ../cgi-bin/openwebmail 
- so I'll have to look into that. I'm pretty sure I have it installed, 
but maybe it installs differently than in the Raq.

But when I put it on the firewall's DMZ, I couldn't ping it at all so 
have to trouble shoot that. Maybe something to do with the new MAC 
address or arp tables or whatever.

/jd

-- 
Jim Dory
Engineering
City of Nome
PO Box 281
102 Division St.
Nome, AK 99762
907.443.6604

http://www.nomealaska.org