Yep - that did it. I removed the e-mail alias from the site(s). I also
had to explicitly define the smarthost in sendmail.mc. It seems as
though the smarthot definition through the BQ admin page is ineffective.
Thank you!
-ML
-----Original Message-----
From: MuntadaNet Webmaster [mailto:webmaster (at mark) muntada.com]
Sent: Saturday, November 10, 2007 1:57 PM
To: coba-e (at mark) bluequartz.org
Subject: [coba-e:11139] Re: Problems with formmail.cgi
Make sure you delete any setting from the email setting server under the
site. Make sure you do the proper DNS. You also may have to manually
edit the local host names file in the /etc/mail to remove any sites that
may have gotten into there. Then do a newaliases command or do a
restart of sendmail. I believe that will fix your issue.
At 11:27 AM 11/10/2007, you wrote:
>I can't do that, as I'm hosting customer domains and they want to be
>able to access the site without entering the www.
>
>It appears that sendmail on the BQ is ignoring the smarthost setting in
>the E-mail config. If I run a test as such:
>
> /usr/sbin/sendmail -v address (at mark) domain.com
>
>On the Raq4, I can see it connecting to my designated smarthost.
>However, using the same command on the BQ, it connects to localhost.
>I've tried uncommenting the "define(`SMART_HOST',`smtp.myhost.net')"
>line, recreating the .cf and restarting sendmail, but it still connects
>to localhost.
>
>-ML
>
>-----Original Message-----
>From: Rodrigo Ordonez Licona [mailto:rodrigo (at mark) xnet.com.mx]
>Sent: Saturday, November 10, 2007 8:55 AM
>To: coba-e (at mark) bluequartz.org
>Subject: [coba-e:11134] Re: Problems with formmail.cgi
>
>
>
>I solved this issue by adding an A record tha points to the IP of the
>mail server,
>
>I use www.domain.com for the Webpage
>
>And domain.com for the email
>
>So Email goes automatically to the correct ip
>
>HTH
>
>Rodrigo O
>Xnet
>
>-----Original Message-----
>From: Mark E. Levy [mailto:levy (at mark) tifnet.net]
>Sent: Viernes, 09 de Noviembre de 2007 07:54 p.m.
>To: coba-e (at mark) bluequartz.org
>Subject: [coba-e:11130] Re: Problems with formmail.cgi
>
>Gerald,
>
>I'm trying to get the BQ to emulate the Raq4's behavior. The Raq4 is
>routing the E-mail properly to my designated smarthost. The BQ is
>trying to deliver it locally, as the target user & domain are present
>on the BQ, but they were on the Raq4 as well.
>
>-Mark
>
>-----Original Message-----
>From: Gerald Waugh [mailto:gwaugh (at mark) frontstreetnetworks.com]
>Sent: Friday, November 09, 2007 12:25 PM
>To: coba-e (at mark) bluequartz.org
>Subject: [coba-e:11129] Re: Problems with formmail.cgi Gerald,
>
>Actually, both the Raq4 and BQ have the domain name in that file.
>
>-Mark
>
>Mark E. Levy wrote;
> >
> > I have a site that I migrated off of a Raq4 to BQ. It has a form
> > that uses the common formmail.cgi script to send the form contents
> > to en E-mail address. On the Raq4, I had set up a SMTP smarthost so
> > that any
>
> > e-mail sent would go to my main SMTP server. I also configured a
> > smarthost under BQ, but it appears that sendmail is still trying to
> > deliver the message locally instead of to the smarthost.
> >
> > How can I resolve this?
>
>Mark,
>
>Look at /etc/mail/local-host-names on the RaQ4 The RaQ4 should not have
>the domain name in /etc/mail/local-host-names Resolution might entail
>reconfig of the RaQ4 hostname, email.
>
>-
>Gerald Waugh
>http://frontstreetnetworks.com
>Front Street Networks
>4604 Fern Ave
>Shreveport, LA 71105-3118
>V: 318-862-3575/3577
>F: 318-862-3576
>
>
>--
>This message has been scanned for viruses and dangerous content by
>MailScanner, and is believed to be clean.
*****************************************************************
MuntadaNet Web Hosting and Web Design Services http://www.muntada.com
Sales - sales (at mark) muntada.com
Support - support (at mark) muntada.com
Billing - billing (at mark) muntada.com
Main Office - 808-689-6092
Fax - (808) 356-0279
*****************************************************************