Dear; This is Postscript;
Gerald, I apologize.
I remembered that I bought the server from a Japanse contractor.
Now I find that the server is not GS14.
It is very similar to GS14.
The contractor might buy it from Front Street Networks.
But it is not GS14, any way.
I will contact the Japanse contractor for
detail specifications of the macine..
Please close this issue.
Eiji Hamano
> Dear;
>
> I created two floppy medias. One is made from "format a:/s".
> The other is made from "format a:" and copy (ph.bat Phlash16.exe,
> flashabl.rom)
> However at step 8), Phlash16 error came up. ( display as follow )
>
> Phoenix Phlash16 Utility Version 1.4 Build 57
> Phoenix Phlash16 Error
> Cannot flash if Memory Manager (eg. HIMEM) present
> PRESS ANY KEY TO EXIT
>
> Now I give up to install bluequartz to the GS14 servers.
> Thank you very much Gerald.
> By now.
>
> Eiji Hamano, HyprSystems Corp.
> -----------------------------------
> 1-1-64 Naka-Meguro
> Meguto-ku Tokyo Japan. ZIP 153-0061
> Tel: +81-3-5768-3826
>
>
>
> ----- Original Message -----
> From: "Eiji Hamano (bluequartz)" <bluequartz (at mark) hypersys.ne.jp>
> To: <coba-e (at mark) bluequartz.org>
> Sent: Wednesday, June 27, 2007 12:33 AM
> Subject: [coba-e:10252] Re: Install bluequartz 4.6 with usb cdrom to non
> cdrom server
>
>
>> Again; Dear Gerald ;
>>
>> I sure to pull the USB CDROM cqble and reinsert
>> when pause a few seconds at "loading /sbin/loader".
>> but no info box "loading USB storage driver".
>>
>> Any way;
>> I bought a "USB floppy disk", and tested GS14_B5121_119.zip.
>>
>> But another problem came up.
>> Followings are guide of "Flash Text.txt". Would you advice me ?
>>
>> My XP cannot execute "format a:/s" of step 3).
>> So, I executed it on GUI. After that, the floppy media contains 800
>> KBytes.
>> Then, I cannot execute step 6), because flashabl.rom is 1,026 Kbytes.
>>
>> 1) Prepare a writable floppy. (NOTE ALL data on that disk
>> WILL BE ERASED)
>> 2) Insert floppy into drive a:
>> 3) Execute [format a:/s]
>> 4) Save the three attachments to a local directory.
>> (ph.bat Phlash16.exe, flashabl.rom)
>> 5) Change to that local directory.
>> 6) Execute [copy *.* a:]
>> 7) Boot from the floppy.
>> 8) Execute ph
>> 9) reboot system when you finished and verify the new verion number
>> on
>> the boot up screen.
>> Note: Flash tool must be phlash16.exe attached with release
>> package.
>>
>> Please advice me what should I execute the "Phlash16.exe" ?
>> Eiji Hamano
>>
>>
>> ----- Original Message -----
>> From: "Gerald Waugh" <gwaugh (at mark) frontstreetnetworks.com>
>> To: <coba-e (at mark) bluequartz.org>
>> Sent: Tuesday, June 26, 2007 9:50 PM
>> Subject: [coba-e:10248] Re: Install bluequartz 4.6 with usb cdrom to non
>> cdrom server
>>
>>
>>>
>>>> > Original fix for Tyan USB install by Front Street Networks
>>>> June 2005
>>>> > ;)
>>>>
>>>> Sorry, I am not clear what you said.
>>>> The Original fix is same as GS14_B5121_119.zip as you
>>>> sujested following ?
>>>>
>>>> >> This issue seems to go away with the Tyan GS14 1.19 BIOS
>>>> Version.
>>>> >> ftp://ftp.tyan.com/bios/GS14_B5121_119.zip
>>>>
>>>> Now I download the GS14_B5121_119.zip.
>>>> The "Flash Text.txt" tald me " 7) Boot from the floppy.".
>>>> However my server GS14 does not have floppy disk. I must use
>>>> "USB floppy disk" ?
>>>> I am afraid of same problem as "USB cdrom disk".
>>>
>>>
>>> USB floppy will work fine, you must use the BIOS setup utility
>>> To boot from the USB floppy.
>>>
>>> Gerald
>>>
>>>
>>>
>>>>
>>>> Eiji Hamano
>>>>
>>>> >> -----Original Message-----
>>>> >> From: Taco Scargo [mailto:taco (at mark) scargo.nl]
>>>> >> Sent: Sunday, June 24, 2007 11:28 PM
>>>> >> To: coba-e (at mark) bluequartz.org
>>>> >> Subject: [coba-e:10230] Re: Install bluequartz 4.6 with usb
>>>> >> cdrom to non cdrom server
>>>> >>
>>>> >>
>>>> >> This is exactly the problem Michael described. Just follow
>>>> >> his guide and it
>>>> >> will work.
>>>> >>
>>>> >> Taco
>>>> >> ----- Original Message -----
>>>> >> From: "Eiji Hamano (bluequartz)" <bluequartz (at mark) hypersys.ne.jp>
>>>> >> To: <coba-e (at mark) bluequartz.org>
>>>> >> Sent: Monday, June 25, 2007 5:10 AM
>>>> >> Subject: [coba-e:10229] Re: Install bluequartz 4.6 with usb
>>>> >> cdrom to non
>>>> >> cdrom server
>>>> >>
>>>> >>
>>>> >> > Dear Michael;
>>>> >> >
>>>> >> >> Known Issues
>>>> >> >> * USB CD ROM issue. The install may drop into text
>>>> >> mode, "ask for
>>>> >> >> language". If this is the case, reboot the server and watch the
>>>> >> >> monitor, when there is a pause and the display reads "loading
>>>> >> >> /sbin/loader" remove and reinsert the CD ROM USB cord. You
>>>> >> should see
>>>> >> >> info box "loading USB storage
>>>> >> >> driver and the install should continue without intervention.
>>>> >> >
>>>> >> > No, my server GS14 can find install CD with the USB CDROM
>>>> >> at loading
>>>> >> > time.
>>>> >> > The server can find USB CDROM at firts loading, but
>>>> >> during bluequartz
>>>> >> > install.
>>>> >> >
>>>> >> > I start up the install CD with the USB CDROM.
>>>> >> > Then; nuonce install panels came up.
>>>> >> > I select language, and I try to select device with following
>>>> >> > message.
>>>> >> >
>>>> >> >>> "What type of media contains the packages to be installed ?",
>>>> >> >
>>>> >> > But any defices which I selected cause error "no device found".
>>>> >> >
>>>> >> > Eiji Hamano
>>>> >> >
>>>> >> >
>>>> >> >
>>>> >>
>>>> >>
>>>> >>
>>>> >> --
>>>> >> This message has been scanned for viruses and
>>>> >> dangerous content by MailScanner, and is
>>>> >> believed to be clean.
>>>> >>
>>>> >
>>>> >
>>>> > --
>>>> > This message has been scanned for viruses and
>>>> > dangerous content by MailScanner, and is
>>>> > believed to be clean.
>>>> >
>>>> >
>>>> >
>>>>
>>>>
>>>> --
>>>> This message has been scanned for viruses and
>>>> dangerous content by MailScanner, and is
>>>> believed to be clean.
>>>>
>>>
>>>
>>> --
>>> This message has been scanned for viruses and
>>> dangerous content by MailScanner, and is
>>> believed to be clean.
>>>
>>>
>>>
>>
>>
>
>
>