> > Original fix for Tyan USB install by Front Street Networks
> June 2005
> > ;)
>
> Sorry, I am not clear what you said.
> The Original fix is same as GS14_B5121_119.zip as you
> sujested following ?
>
> >> This issue seems to go away with the Tyan GS14 1.19 BIOS
> Version.
> >> ftp://ftp.tyan.com/bios/GS14_B5121_119.zip
>
> Now I download the GS14_B5121_119.zip.
> The "Flash Text.txt" tald me " 7) Boot from the floppy.".
> However my server GS14 does not have floppy disk. I must use
> "USB floppy disk" ?
> I am afraid of same problem as "USB cdrom disk".
USB floppy will work fine, you must use the BIOS setup utility
To boot from the USB floppy.
Gerald
>
> Eiji Hamano
>
> >> -----Original Message-----
> >> From: Taco Scargo [mailto:taco (at mark) scargo.nl]
> >> Sent: Sunday, June 24, 2007 11:28 PM
> >> To: coba-e (at mark) bluequartz.org
> >> Subject: [coba-e:10230] Re: Install bluequartz 4.6 with usb
> >> cdrom to non cdrom server
> >>
> >>
> >> This is exactly the problem Michael described. Just follow
> >> his guide and it
> >> will work.
> >>
> >> Taco
> >> ----- Original Message -----
> >> From: "Eiji Hamano (bluequartz)" <bluequartz (at mark) hypersys.ne.jp>
> >> To: <coba-e (at mark) bluequartz.org>
> >> Sent: Monday, June 25, 2007 5:10 AM
> >> Subject: [coba-e:10229] Re: Install bluequartz 4.6 with usb
> >> cdrom to non
> >> cdrom server
> >>
> >>
> >> > Dear Michael;
> >> >
> >> >> Known Issues
> >> >> * USB CD ROM issue. The install may drop into text
> >> mode, "ask for
> >> >> language". If this is the case, reboot the server and watch the
> >> >> monitor, when there is a pause and the display reads "loading
> >> >> /sbin/loader" remove and reinsert the CD ROM USB cord. You
> >> should see
> >> >> info box "loading USB storage
> >> >> driver and the install should continue without intervention.
> >> >
> >> > No, my server GS14 can find install CD with the USB CDROM
> >> at loading
> >> > time.
> >> > The server can find USB CDROM at firts loading, but
> >> during bluequartz
> >> > install.
> >> >
> >> > I start up the install CD with the USB CDROM.
> >> > Then; nuonce install panels came up.
> >> > I select language, and I try to select device with following
> >> > message.
> >> >
> >> >>> "What type of media contains the packages to be installed ?",
> >> >
> >> > But any defices which I selected cause error "no device found".
> >> >
> >> > Eiji Hamano
> >> >
> >> >
> >> >
> >>
> >>
> >>
> >> --
> >> This message has been scanned for viruses and
> >> dangerous content by MailScanner, and is
> >> believed to be clean.
> >>
> >
> >
> > --
> > This message has been scanned for viruses and
> > dangerous content by MailScanner, and is
> > believed to be clean.
> >
> >
> >
>
>
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
>
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.