Original fix for Tyan USB install by Front Street Networks
June 2005 ;)
-
Gerald Waugh
http://frontstreetnetworks.com
Front Street Networks
4604 Fern Ave
Shreveport, LA 71105-3118
V: 318-862-3575/3577
F: 318-862-3576
> -----Original Message-----
> From: Taco Scargo [mailto:taco (at mark) scargo.nl]
> Sent: Sunday, June 24, 2007 11:28 PM
> To: coba-e (at mark) bluequartz.org
> Subject: [coba-e:10230] Re: Install bluequartz 4.6 with usb
> cdrom to non cdrom server
>
>
> This is exactly the problem Michael described. Just follow
> his guide and it
> will work.
>
> Taco
> ----- Original Message -----
> From: "Eiji Hamano (bluequartz)" <bluequartz (at mark) hypersys.ne.jp>
> To: <coba-e (at mark) bluequartz.org>
> Sent: Monday, June 25, 2007 5:10 AM
> Subject: [coba-e:10229] Re: Install bluequartz 4.6 with usb
> cdrom to non
> cdrom server
>
>
> > Dear Michael;
> >
> >> Known Issues
> >> * USB CD ROM issue. The install may drop into text
> mode, "ask for
> >> language". If this is the case, reboot the server and watch the
> >> monitor, when there is a pause and the display reads "loading
> >> /sbin/loader" remove and reinsert the CD ROM USB cord. You
> should see
> >> info box "loading USB storage
> >> driver and the install should continue without intervention.
> >
> > No, my server GS14 can find install CD with the USB CDROM
> at loading
> > time.
> > The server can find USB CDROM at firts loading, but
> during bluequartz
> > install.
> >
> > I start up the install CD with the USB CDROM.
> > Then; nuonce install panels came up.
> > I select language, and I try to select device with following
> > message.
> >
> >>> "What type of media contains the packages to be installed ?",
> >
> > But any defices which I selected cause error "no device found".
> >
> > Eiji Hamano
> >
> >
> >
>
>
>
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
>
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.