Hello Frank,
try to boot with the additional command line parameter:
pci=nommconf
If it works, you will have to add it to
/boot/grub/grub.conf
Chris
Friday, June 22, 2007, 5:59:22 PM, you wrote:
FSW> Well the minimum test install of 4.5 stop at the exact same spot even when I
FSW> tried the
FSW> i586 install....
FSW> Probing PCI Bus [00]
FSW> D/l the x86_64 now... I will see what happens
FSW> Frank
FSW> -----Original Message-----
FSW> From: Chris Hemsing [mailto:C.Hemsing (at mark) gmx.net]
FSW> Sent: Friday, June 22, 2007 2:18 AM
FSW> To: Franklin S Werren
FSW> Subject: [coba-e:10193] Re: AW: Re: Port for newer boxes - try this ISO
FSW> Hello Frank,
FSW> to perform a minimum 4.5 test install the first CD is sufficient.
FSW> You don't need the DVD.
FSW> Chris
FSW> Friday, June 22, 2007, 5:28:23 AM, you wrote:
FSW>> Downloading the DVD ISO of 4.5 I386 ver via Bittorrent..
FSW>> Should have it by morning... I'll get X86_64 later if needed....
FSW>> I have a ver 5 DVD Both versions (i386 and X86_64) already....
FSW>> Frank
FSW>> -----Original Message-----
FSW>> From: Michael Stauber [mailto:bq (at mark) solarspeed.net]
FSW>> Sent: Thursday, June 21, 2007 7:47 PM
FSW>> To: coba-e (at mark) bluequartz.org
FSW>> Subject: [coba-e:10191] Re: AW: Re: Port for newer boxes - try this ISO
FSW>> Hi Franklin.
>>> OK I tried the SOL BQ 4.7....
>>> Using option 12 and 32, Grub and LiLO
>>> No Go
FSW>> Ok, it was worth a try. Next step would do what other suggested: Get a
FSW> stock
FSW>> CentOS-4.5 install CD and try with that. If that doesn't work, try
FSW> CentOS-5 -
FSW>> just to see if that gets you going. If THAT fails as well, then it
FSW> would be
FSW>> time filing a bug report with the CentOS people by giving them specific
FSW>> information about the problem and your hardware, so that they can sort
FSW> you
FSW>> out.
FSW>> --
FSW>> With best regards,
FSW>> Michael Stauber
FSW>> http://www.solarspeed.net